Garmin G3X Touch Pilot's Manual page 94

Flight Instruments
HSI ORIENTATION
The HSI may be configured to provide directional information in either 'Heading' or
'Auto Trk/Hdg' "Track-up" modes. Selecting Heading Mode orients the HSI to display
aircraft heading in a conventional manner with heading shown at the top of the
compass card as indicated by the lubber line. In 'Auto Trk/Hdg' "Track-up" mode,
the aircraft symbol and lubber line move to indicate heading and wind correction
while ground track is shown at the top of the compass card. While in 'Auto Trk/Hdg'
the HSI will remain heading-based when the aircraft is on the ground or when the
flight director is in HDG mode. Refer to the G3X Touch installation manual for more
information on configuring the HSI Orientation.
Changing HSI orientation:
1) With the full screen PFD displayed, press the MENU Key.
2) Touch More Options.
3) Touch
options.
4) Touch Heading or Auto Trk/Hdg.
Current
Ground
Track
72
Garmin G3X Touch
in the HSI Orientation field to display the HSI Orientation
Track up HSI
™ Pilot's Guide for Certified Aircraft
Heading
Pointer
Aircraft
Symbol
showing
wind
correction
190-02472-00 Rev. D