Track Vector - Garmin G3X Touch Pilot's Manual

Appendix B
5) Touch the Delete Saved Track Button.
6) Touch the Yes Button to delete the saved track, or touch the No Button to
cancel the deletion.
Deleting all saved track logs:
1) From the split-screen and/or full-screen MFD, press the MENU Key twice to
display the Main Menu. (The 'Flight Log' option is not available from the
full-screen PFD Main Menu).
2) Touch the Track Log Button. The Track Log Page is displayed.
3) Press the MENU Key to display the track log menu.
4) Touch the Delete All Saved Tracks Button.
5) Touch the Yes Button to delete all saved tracks, or touch the No Button to
cancel the deletion.

TRACK VECTOR

The G3X Touch draws an electronic "Track Vector" on the Map Page. The horizontal
marks on the Track Vector can be set to 'time' or 'distance'. The entire length of the
track is set to the specified time or distance and the lines are 'whole' values. When
configured to 'time', the tick marks will always be on the whole minute, even if the
total distance is set to XX:30 (mm:ss). When configured to 'distance' and the units are
miles, the tick marks will always be on the whole mile, even if the total distance is a
fraction (in this case, there would not be a tick mark at the end of the line).
366
Garmin G3X Touch
Track
Vector
Track Vector (Map Page)
™ Pilot's Guide for Certified Aircraft
190-02472-00 Rev. D