Garmin G3X Touch Pilot's Manual page 45

Left/Right Side
Knob Action
(GDU 460 only)
Toggle Knob
Action
(GDU 470 only)
NOTE: If the PFD Split Screen Side is set to Right in Display Settings, this option will appear as
"Left Side Knob Action."
Press To Toggle
Knob Action
(GDU 460 only)
NOTE: This setting is always enabled on the GDU 470.
G Meter
Lateral Deviation Toggles lateral deviation indicator.
Synthetic Vision Overlays 3D-rendered terrain on full-screen attitude presentation.
Flt. Path Marker Overlays a marker
Pathways
Traffic
G3X TOUCH SYSTEM ANNUNCIATIONS
When an LRU or an LRU function fails, a large red 'X' is typically displayed over
the instrument(s) or data experiencing the failure. After starting the system, certain
instruments remain invalid as equipment begins to initialize. All instruments should
be operational within one minute of starting the system. If any instrument remains
flagged, and it is not likely an installation related problem, the G3X Touch should be
serviced by a Garmin-authorized repair facility.
190-02472-00 Rev. D
Left/Right inner knob Left/Right outer knob
Course/Baro CRS value
FD Bug/Baro Flight Director bug
Heading/Altitude Heading bug
When enabled, pressing an inner knob will toggle the functionality
of inner and outer knobs. Knobs revert to previous functions after 10
seconds. Useful for situations where the split-screen is frequently used.
Off Disables G Meter.
G Meter appears in place of HSI when G3X Touch
Auto Display
detects G load above +2.1G or below -0.5G.
On (Replace HSI) G Meter replaces HSI.
aircraft bearing relative to heading, as affected by winds.
Overlays 3D magenta flight path boxes on full-screen attitude
presentation, indicating path to next waypoint.
Overlays indications of specific aircraft on full-screen attitude
presentation.
More PFD Options
Garmin G3X Touch
on full-screen attitude presentation indicating
™ Pilot's Guide for Certified Aircraft
System Overview
Local barometric pressure
Local barometric pressure
Altitude bug
23