Grizzly G0637HEP Manual page 43

48. Place the collection drum vacuum rings on
the bottom of the collection drums (see
Figure 42).
Note: During operation, this ring and the
vacuum connection to the cyclone funnel will
prevent the collection bag from collapsing.
Figure 42. Inserting collection drum vacuum
ring.
49. Install the larger plastic collection bag into the
drum, place the lid on it and hook the latch
over the lid, as shown in Figure 43, then
clamp it in place.
Figure 43. Latch hooked over the lid for
clamping.
Model G0637/G0638 (Mfd. Since 04/12)
50. Connect the dust collection drum assemblies
to the funnel port with the 9" flexible ducts
and 9" duct clamps (see Figure 44).
Figure 44. Dust collection drum assemblies
connected to funnel port.
51. Use the 2" hose clamps to attach one end
of the 2" x 39" vacuum hose to the cyclone
vacuum port and the other end to the vacuum
manifold (see Figure 45).
2" Hose
Manifold
Figure 45. Vacuum hoses attached to the
vacuum manifold.
1 ⁄ " Hoses
1
4
-29-