Table of Contents
Advertisement
Operation and Specifications
Channel Select (SS-2002 & SS-2002RM Only)
Tap the Ch Select key to select channel 1 or 2. The key is green when channel 1 is selected and red when channel 2 is selected.
Headset/Headphone/Speaker/Microphone Selection
To use a headset or telephone style handset, set the Speaker and Panel Mic keys to OFF.
•
•
To use headphones with the built-in panel microphone, set the Speaker key to OFF, set the Panel Mic Key to ON, and make
sure a gooseneck microphone is not inserted in the panel microphone connector.
•
To use headphones with a gooseneck microphone, set the Speaker key to OFF, set the Panel Mic Key to ON, and make sure
a gooseneck microphone is inserted in the panel microphone connector.
To use the speaker with a handheld dynamic microphone, set the speaker key to ON and set he Panel Mic Key to OFF.
•
•
To use the speaker with the built-in panel microphone, set the Speaker and Panel Mic keys to ON, and make sure a
gooseneck microphone is not inserted in the panel microphone connector.
•
To use the speaker with a gooseneck microphone, set the Speaker and Panel Mic keys to ON, and make sure a gooseneck
microphone is inserted in the panel microphone connector.
Receiving Calls
When there is an incoming call signal, the Call key will flash red. There will also be a beep tone in the headphones or speaker
if the beep feature is activated.
NOTE: The incoming call indication is provided only for the currently selected intercom channel in the case of SS-2002 &
SS-2002RM models.
Turn on the Talk and Listen keys and being your conversations. Turn the keys off when finished.
NOTE: You can turn the talk and listen keys on in either momentary or latched mode. For momentary operations, press and
hold the key. For latched operation, tap the key to turn it ON. Then tap it again to turn it off when finished.
Calling an Intercom Channel
SS-2002 & SS-2002RM only: select the desired intercom channel.
1.
Press and hold the Call key.
2.
An inaudible call signal will be sent, and the Listen key will automatically turn ON.
When you hear a response, release the call key and activate the talk key.
3.
Turn off your Talk and Listen keys to end the conversation.
4.
16
Advertisement
Table of Contents
