Audiocom SS-1002 User Manual page 2

P N
ROPRIETARY OTICE
The product information and design disclosed herein were originated by
and are the property of Telex Communications, Inc. Telex reserves all
patent, proprietary design, manufacturing, reproduction, use and sales
rights thereto, and to any article disclosed therein, except to the extent
rights are expressly granted to others.
C N
OPYRIGHT OTICE
Copyright 2006 by Telex Communications, Inc. All rights reserved.
Reproduction, in whole or in part, without prior written permission from
Telex is prohibited.
W N
ARRANTY OTICE
See the enclosed warranty card for further details.
C S
USTOMER UPPORT
Technical questions should be directed to:
Customer Service Department
RTS/Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 USA
Telephone: 800-392-3497
Fax: 800-323-0498
Factory Service: 800-553-5992
R S I
ETURN HIPPING NSTRUCTIONS
Customer Service Department
Telex Communications, Inc. (Lincoln, NE)
Telephone: 402-467-5321
Fax: 402-467-3279
Factory Service: 800-553-5992
Please include a note in the box which supplies the company name,
address, phone number, a person to contact regarding the repair, the type
and quantity of equipment, a description of the problem and the serial
number(s).
FCC Statement
This equipment uses, and can radiate radio frequency energy that
may cause interference to radio communications if not installed
in accordance with this manual. The equipment has been tested
found to comply with the limits of a Class A computing device
pursuant to Subpart J Part 15 of FCC Rules which are designed to
provide reasonable protection against such interference when
operated in a commercial environment. Operation of this
equipment in a residential area may cause interference which the
user (at his own expense) will be required to correct.
This product meets Electromagnetic Compatibility
Directive 89/336/EEC
Shipping to the Manufacturer
All shipments of product should be made via UPS Ground, prepaid (you
may request from Factory Service a different shipment method). Any
shipment upgrades will be paid by the customer. The equipment should
be shipped in the original packing carton. If the original carton is not
available, use any suitable container that is rigid and of adequate size. If
a substitute container is used, the equipment should be wrapped in paper
and surrounded with at least four (4) inches of excelsior or similar
shock-absorbing material. All shipments must be sent to the following
address and must include the Proof of Purchase for warranty repair.
Upon completion of any repair the equipment will be returned via
United Parcel Service or specified shipper, collect.
Factory Service Department
Telex Communications, Inc.
8601 East Cornhusker Hwy.
Lincoln, NE 68507 U.S.A.
Attn: Service
This package should include the following:
QTY DESCRIPTION
1 SS-1002, 1 channel front plate
assembly
1 SS-2002, 2 channel front plate assem-
1 User Manual
4 Screw, Flat Hd, 6-32 x 5/16"
One of the following, depending on what was ordered:
1 P-box, 1-channel
1 S-box, w/handle, 1-channel
1 P-box, 2-channel
1 S-box, w/handle, 2-channel
1
1 S-box, w/out handle, 1-channel
1 S-box, w/out handle, 2-channel
1 Warranty Card
2 End Caps
1 Statement of Conformity
SS-2002RM
1 SS-2002RM Final Assembly
4 Foot, bumper, black
1 User Instructions
1 Statement of Conformity
1 Warranty
PART NO.
9010-7741-000
9010-7741-001
bly
9350-7741-000
51847-122
9010-7627-007
9010-7627-008
9010-7627-009
9010-7627-010
U-box 9010-7627-004
9010-7627-011
9010-7627-012
38110-390
9310-7620-001
38109-675
9010-7742-000
56471-001
9350-7741-000
38109-675
38110-390