Chapter 1 Introduction; Introduction; Description; Features - Audiocom SS-1002 User Manual

Introduction

Thank you for purchasing the Audiocom SS-1002/2002/2002RM Intercom Speaker Station. We hope the many design features
of this product will satisfy your intercommunication requirements for many years to come. To get the most out of you new
intercom stations, please take a few moments to look through this booklet before using the Intercom Speaker Stations for the
first time.

Description

The Intercom Speaker Stations may be used with a headset, or with the built-in speaker and the panel microphone or an
optional gooseneck microphone. Another alternative is to use headphones and either the built-in panel microphone or an
optional gooseneck microphone. As an alternative to a headset, a telephone style handset may also be used. The SS-1002 is a
single-channel station; the SS-2002 & SS-2002RM provide switch selectable access to either of two intercom channels. Both
the SS-1002 and the SS-2002 com in three version to suit a variety of applications. The "S" box is a portable version. It has a
carrying handle and dual "loop-through" intercom connectors which permit stations to be quickly interconnected using pre-
fabricated cables. The "P" box is stationary version. It also has dual "loop-through" connectors for quick interconnection, but
the case is designed for desktop or console-mount applications. The "U" box is designed for permanent, in-the-wall mounting.
It uses push type wire terminals for connection to the intercom system. In addition, the SS-2002RM can be used on a desktop
or mounted in a standard 19" equipment rack (using the optional RM-14 Rack Mount Kit).

Features

Channel and Power Connections - The "U" box uses quick release terminals to connect to audio and power wires. For the
1.
"S" box and "P" box versions, the terminal connections are brought out to the dual, loop-thru XLR connectors on the side
of the box. These permit several stations to be connected in a string, or daisy-chain, using pre-fabricated intercom cables.
Configuration DIP Switches - These switches control the following features:
2.
Call Beep: In addition to a flashing call key indication for incoming calls, an incoming call beep tone can also be
used.
Headset Microphone Type Selection: Either a balanced or unbalanced dynamic microphone can be selected.
DC call enable: This may be turned on to use the intercom station with intercom systems that use DC call signaling.
CHAPTER 1
Introduction
3