Advertisement
Attach the red dot finder scope to the telescope tube:
First remove the two thumb nuts from the scope body. Then place the finder scope onto
the two bolts and re-attach the nuts. The finder scope should face towards the open end of the
telescope (see arrow in diagram).
Insert the diagonal into the eyepiece side of the telescope. Tighten the thumbscrews to a
firm feel only. Slide the eyepiece into the open end of the diagonal. Tighten the. Remove the
dust cover from the other end of telescope before observation.
Dovetail
lock knob
Figure 2. Install the N114 telescope onto a telescope mount
Point toward open
end of telescope
Figure 3. Install a red dot finder
Bolts
Switch
3
Advertisement
