Table of Contents
Advertisement
Alarms: Firmware Versions 5.01 and Above
Any time a Fault / Warning occurs, a combination of LED's will illuminate to notify you there is a problem and help
identify the kind of Fault / Warning has occurred. An error message will display and flash every 2 seconds for an
alarm, temperature, or current warning, and every 10 seconds for all other types of warnings.
•
Faults will not automatically clear. Warnings will clear after a set time, if condition was fixed.
•
To clear an fault, press and hold the RESET button on the display button pad for 3 seconds.
•
To clear a warning instantly press and immediately release the RESET button.
Fault / Warning Scenarios
The following pages describe the most likely fault / warnings you could receive.
Alarm Type
Low Level
Warning
332298M
What it Looks Like
HH
MM
SS
##
!
OFF
ON
MM : SS
HH : MM
Alarms: Firmware Versions 5.01 and Above
What it Indicates
Level of lubricant in
reservoir is low and
additional lubricant needs
to be added.
Unit continues to operate
as normal for a limited
period of time until a low
level alarm is triggered or
until the reservoir is filled
and 30 seconds have
passed, at which time the
warning will self-clear.
Solution
Add lubricant to reservoir.
After lubricant
is added,
press the
RESET button
to clear the warning.
39
Advertisement
Table of Contents
