Advertisement
Quick Links
Advertisement
Related Manuals for NBB SR8303
Summary of Contents for NBB SR8303
- Page 1 Assembly Instructions Shelter type: SR8303 SR8303-01-27102021-USA...
-
Page 2: Exploded View
EXPLODED VIEW... -
Page 3: Parts List
PARTS LIST ITEM PART NAME Size (inch) IMAGE QTY. NUMBER 78.74 x 40.74 S1 Frame 78.74 x 20.3 S3 Frame 20 & 43 (M1) 4.3 x 4.3 x 1.57 CB1 Bracket 4.33 x 1.57 JF1 Bracket 20.15 x 1.57 x ST15 Tie Bar ST15 1.57... - Page 4 FIXINGS Fittings Bolt set M10 BTANCM12100 1.5" M10/12 x 100 mm 1" Tech Black M10 x 60mm Washer Tech screw Caps Concrete Bolt screw Pack A+B Image Tools required: Drill/Screwdriver 17mm Wrench Mallet T25 Torx bit...
- Page 5 Step 1 Assemble S1 and S3 frames to make up the main structure using CB1 brackets for the corners and JF1 brackets for the straight joints. Please note 1.5" Tec Screws are for roof panels only MEASURE THE WIDTH AND DEPTH OF THE SHELTER TO CHECK CORRECT ALIGNMENT.
- Page 6 Step 2 Attach ST15 Tie bars to SC frames using CB1 Brackets. Fix the ST3 Tie bars to the ST15 bars using CB1 Brackets and attach to the P5 Post using the JFT bracket. ST15 ST15 ST15 ST15 DETAIL A SCALE 1 : 10 ENSURE CORRECT ALIGNMENT ON...
- Page 7 Step 3 Attach AR1R rafters using DR brackets. Secure the AR1IS End Panels to S1 frames using 1" tech screws. The end rafters need to be placed in position at the same time as the AR1IS End Panels. AR1R AR1IS AR1R AR1R AR1IS...
- Page 8 Step 4 Attach the AR1CLTO and the AR1CLTI to the top of the rafters with the AR1CLTO on the outside and the AR1CLTO on the inside. The ARFSO and ARFSI parts are to be attached to the lower part of the rafters as shown below.
- Page 9 Step 5 Attach the AR1POA and AR1PIA roof panels to the top of the rafters. Cap off the top using AR1CUTO and AR1CUTI trim as shown. Use the AR1TS strips to cover the gaps between the panels. Once the shelter is in its final position and square, it can be secured to the ground using the concrete bolts and FT3/FT1 brackets.
- Page 10 PLAN VIEW OVERALL DIMENSIONS AND GROUND FIXING POSITIONS Suggested size for concrete base: 8" oversized on all 4 sides. 20.35 41.26...
-
Page 11: Maintenance
THANK YOU FOR PURCHASING THIS PRODUCT MAINTENANCE: To ensure your products give you many years of use we recommend that you: • Clean panels regularly with soapy water • Ensure all fittings are tight (for example after a big storm) •...