Honda CRF250RLA Owner's Manual page 39

Storage Equipment
Helmet Holder
The helmet holder is located on the left side
of the motorcycle.
When hanging two helmets, use the helmet
set wire.
The helmet set wire is in the tool kit.
u (P.36)
Ignition key
Pin
Lock
cover
Helmet holder
Helmet set wire
Helmet D-rings
#
Unlocking
Open the lock cover, insert the ignition key
and turn it counterclockwise.
#
Locking
Hang your helmet on the holder pin and
a
push it in to lock.
Remove the key and close the lock cover.
b
Use the helmet holder only when parked.
u
WARNING
3
Riding with a helmet attached to the
holder can interfere with the rear wheel
or suspension and could cause a crash
in which you can be seriously hurt or
killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
Continued
35