Dell HHB Owner's Manual page 109

Next steps
1. Install the following:
a. Internal USB key
b. SD vFlash card
c. IDSDM or rSPI card
d. NDC
e. mezzanine cards
f. PCIe extender or storage controller card
g. Hard drive or SSD cage
h. Hard drive or SSD backplane
i. Hard drive(s) or SSD(s)
NOTE: Ensure that you reinstall the hard drives or SSDs in their original locations.
j. Cooling shroud
k. Memory modules
l. Processor(s) and heat sink(s)
2. Remove the plastic I/O connector covers from the back of the system.
3. Follow the procedure listed in the After working inside your system section.
4. Import your new or existing iDRAC Enterprise license. For more information, see the iDRAC8 User's Guide at Dell.com/
idracmanuals.
5. Ensure that you:
a. Use the Easy Restore feature to restore the Service Tag. For more information, see the Restoring the Service Tag by using Easy
Restore section.
b. If the Service Tag is not backed up in the backup flash device, enter the system Service Tag manually. For more information, see
the Restoring the Service Tag by using Easy Restore section.
c. Update the BIOS and iDRAC versions.
d. Reenable the Trusted Platform Module (TPM). For more information, see the Reenabling the TPM for BitLocker users section or
the Reenabling the TPM for Intel TXT users section.
Related concepts
Trusted Platform Module
Related tasks
Removing the system board
Installing the Trusted Platform Module
After working inside your system
Restoring the Service Tag by using the Easy Restore feature
Entering the system Service Tag by using System Setup
Initializing the TPM for BitLocker users
Initializing the TPM for TXT users
Replacing the internal USB key
Installing the optional IDSDM card
Installing the optional rSPI card
Installing the Network Daughter Card
Installing the mezzanine card
Installing the PCIe extender or storage controller card
Installing the hard drive or SSD cage
Installing the hard drive or SSD backplane
Installing a hard drive or SSD
Installing the cooling shroud
Installing memory modules
Installing a processor
Related reference
Safety instructions
Installing and removing blade components 109