Table of Contents
Advertisement
¯
Fill water tank indicator
If the water tank is empty, an audible signal sounds and the
symbol appears. Operation is stopped.
Open the appliance door carefully. Steam will escape.
1.
Remove the water tank, fill it with water and reinsert it.
2.
Press the
button briefly.
J
3.
If you have switched on the basic setting "Continue after
closing door", restarting is not required (see section: Basic
settings).
Note: If there is no more water in the tank, you will hear a loud
pumping sound until the evaporator dish has boiled dry. Only
then will
appear and the audible signal will sound.
¯
When this happens, pause cooking and refill the tank (see:
Pausing operation).
Switching off the appliance
:
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening, do not stand too close to the appliance. Ensure
that, depending on the temperature, steam is not visible.
Press the
button to switch off the appliance. Open the
#
appliance door carefully.
The cooling fan may continue to run when you open the
appliance door.
Before you start another operation, empty the evaporator dish.
After each use
Emptying the water tank.
Empty the water tank after each use:
Automatic programmes
You can prepare food really easily with 20 different
programmes.
In this section, you will find out
how to set one of the automatic programmes
■
hints and tips on the programmes
■
which programmes you can set
■
Setting a programme
Select the appropriate programme from the programme table.
Follow the instructions for the programmes.
Press the
button to switch on the appliance.
#
1.
Press the
button.
g
2.
The first programme
˜ ‚
10
appears in the display.
Pull the water tank out of the appliance slowly, keeping it
1.
horizontal, so that no remaining water can drip out of the
¯
valve.
Empty out the water.
2.
Thoroughly dry the water tank and the tank recess in the
3.
appliance.
Drying the cooking compartment
:
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
Leave the appliance door ajar until the appliance has cooled
down.
Use the enclosed cleaning sponge to empty the evaporator
dish after every cooking operation. Otherwise, the dish may
overflow during the next cooking operation.
Wipe the cooled cooking compartment and the evaporator dish
with the enclosed sponge and dry well with a soft cloth.
Wipe units and handles dry where condensation has built up.
Changing the clock time
No cooking time should be set.
Press the
0
button.
1.
The
symbol appears in the display.
À0
Change the time with the rotary selector.
2.
Press the
button.
0
3.
The change is applied.
You can hide the clock. It is then only visible when the
appliance is switched on (see section: Basic Settings).
Turn the rotary selector to set the required programme.
3.
Press the
button.
h
4.
A default weight appears in the display.
If a signal sounds, you do not need to enter a weight for this
programme.
Advertisement
Table of Contents
