NEC Cinema NP-NC603L User Manual page 60

6. Appendix
6-2-3. DOUSER indicator
Indicator condition
Steady light Green
Off
6-2-4. TEMP. indicator
Indicator condition
Steady light Red
Blinking light Red
6-2-5. LIGHT indicator
Indicator condition
Off
Blinking light Green
Steady light Green
6-2-6. POWER indicator
Indicator condition
Off
Blinking light Orange
Green
(cycles of 1)
(Note 1)
Green
(cycle of 3 seconds)
(Note 2)
Steady light Green
Orange
(Note 1) Repeats 0.5 seconds on → 0.5 seconds off.
(Note 2) Repeats 2.5 seconds on → 0.5 seconds off.
6-2-7. POWER (BOOT) indicator
Indicator condition
Steady light Blue
Blinking light Blue
Off
60
Projector condition
The douser is closed.
The douser is opened.
Projector condition
The projector temperature rises close to the operating
temperature limit.
The projector temperature exceeded the operating
temperature.
Projector condition
The light source is off.
The ON/OFF of the light source cannot be operated.
The light source is on.
Projector condition
The projector power supply is off.
While the projector software is starting
Preparing to turn power on/cooling fan rotating
(State from turning the power off to entering standby
mode).
When the sleep timer is activated
The projector is turned on.
The projector is in standby.
Projector condition
While the projector software is starting
The projector power supply is on, or the projector is in
standby.
Note
-
-
Note
An error message is displayed
in the LCD screen.
Check the content of the error.
An error message is displayed
in the LCD screen.
Check the content of the error.
Note
-
-
-
Note
-
Wait for a moment.
Wait for a moment.
-
-
-
Note
Wait for a moment.
Wait for a moment.
-