Turning Your Projector Off - NEC Cinema NP-NC603L User Manual

3. Projection of Images (Basic Operation)

3-7. Turning your projector off

1
Press the POWER button on the projector control panel for three seconds or longer.
The light is turned off, the POWER button indicator blinks green, and the STATUS indicator blinks orange (cooling state).
The fan will continue to rotate while cooling, and the amount of time remaining for cooling is displayed on the LCD screen.
The cooling-off time is 90 seconds.
When the cooling is finished, the POWER button indicator turns off and the status indicator lights orange (standby state).
KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for 30 seconds by
default. Buttons on the control panel do not function while KEY LOCK is on. (See page 36)
2
Wait till the projector enters standby state before turning off the main power switch of the
projector.
The POWER button indicator is turned off and the main power is turned off.
3
Turn off the AC power to the projector.
In the following instances, do not turn off the main power switch or disconnect the AC power. Doing so can damage
NOTE
the projector.
• While projecting images
• While the fan is running after the power is turned off
- While the projector is cooling down after the power was turned off.
- When using the IMB: 90 seconds
- During IMB operation (when the projector is not in the standby mode)
38