NEC Cinema NP-NC603L User Manual page 19

1-3-5. Control panel
1. button (Light button)
Toggles ON and OFF the light on the control panel of the projector and the backlight on the LCD screen.
2. DOUSER indicator
Displays the douser open/close state. (See page 60)
3. TEMP. indicator
Displays the status of the temperature inside the projector. It blinks or lights up when the temperature inside the projector
rises close to the operating temperature limit or exceeds the operating temperature. (See page 60)
4. LIGHT indicator
Displays the status of the light source. The indicators turn on when the light source is on and turn off when the light source
is off. (See page 60)
5. POWER indicator
Displays the status of the power after the projector software has been started. (See page 60)
6. POWER (BOOT) indicator
Displays the status that the projector software is starting after the main power switch has been turned ON (see page 60).
It goes off once the projector software startup and internal check are completed.
7. LCD screen
The LCD screen displays menus and setting values for the projector operations.
8. UP/DOWN/LEFT/RIGHT buttons
Press these buttons to select a menu item while a menu is displayed.
9. MENU button
Press this button to display the menu for various settings and adjustments. (See page 44)
10. ENTER button
Press this button to select the menu item.
1. What's in the Box? and the Names of the Projector Parts
2 3
1
7
8
9
10
11
16
17
14
20
4 5 6
12
13
14
15
19
18
19