Telefunken TKP2198USM Service Manual page 24

B. Picture set to "Standard" status. (Brightness=50, Contrast=50, Colour=50, White
tone =Normal.)
C. Sound set normal.(Volume=30,Balance=50.)
D.
2). Set the user picture and sound curve value
A. Brightness curve:
OSD menu Default Value
BRI0 0
BRI50 32
BRI100 63
B. C ontrast curve:
OSD menu Default Value
CON0 0
CON50 32
CON100 63
C. C olour curve:
OSD menu Default Value
COL0 0
COL50 32
COL100 63
D. Volume curve:
OSD menu Default Value
VOL0 0
VOL10 38
VOL30 65
VOL50 71
VOL80 77
VOL100 83
3). Set the value for "POWER LOW" and "POWER HIGH"
A. Connect the main voltage at low threshold 95VAC/50Hz.
B. Select item "POWER LOW".
C. Adjust the value until the hint display just change between "AC: NORMAL" and "AC:
LOW".
D. Connect the main voltage at high threshold 255VAC/50Hz.
E. Select item "POWER HIGH.
F. Adjust the value until the hint display just change between "AC: NORMAL" and "AC:
HIGH".
Chassis Name
Issued on
Updated on
Set the minimal brightness when user Brightness=0
Set the brightness when user Brightness=50
Set the maximal brightness when user Brightness=0
Set the minimal contrast when user C ontrast=0
Set the contrast when user C ontrast=50
Set the maximal contrast when user C ontrast=0
Set the minimal colour when user C olour=0
Set the colour when user C olor=50
Set the maximal colour when user C olour=0
Set the volume when user Volume=0
Set the volume when user Volume=10
Set the volume when user Volume=30
Set the volume when user Volume=50
Set the volume when user Volume=80
Set the volume when user Volume=100
NX56-AP&NX56B-AP
2008-01-18
2009-04-24
Description
Description
Description
Description
Serial No.
Page 13 of 17
Page
4.0
Version
Remark
Set to 3
Use default value
Remark
Set to 3
Use default value
Remark
Set to 3
Use default value
Remark
Use default value
Set to 63
Set to 69
Set to 75
Set to 81