Table of Contents
Advertisement
1. Enter P-Mode, press key "4" to select page "4".Set the corresponding item to require
value. See below table 3.7.1 for detailed description.
Table 3.7.1: Producing parameter setup and option page "4"
OSD menu
WARM UP STATUS
SHOP INIT
DCXO
FACTORY HOTKEY
POWER ON MODE
EEPROM INIT
POWER LOW
POWER HIGH
DEFAULT SND. SYS
BLUE BACK OPT
BLACK BRI
BRI CURVE
CON CURVE
COL CURVE
VOL CURVE
Description:
1). Set the shopping status
When trigger the "SHOP INIT" item form "0" to "1", the TV will be put on selling status.
The TV status after shopping status:
A. "FACTORY HOTKEY" had set to "OFF".
Chassis Name
Issued on
Updated on
Default Value
0
Set aging mode
0
Set the shopping status
Crystal oscillator
2
frequency adjustment
1
Set factory hotkey
LAST
Set the power on mode
0
EEPROM initial
101
Set the "Voltage display"
"LOW" and "HIGH"
176
Set the default sound
DK
system when auto store
Set the Background
2
option while no signal
40
background brightness
>>
Set the brightness curve
>>
Set the contrast curve
>>
Set the colour curve
>>
Set the volume curve
NX56-AP&NX56B-AP
2008-01-18
2009-04-24
Description
Recommended value= "16"
Recommended value= "168"
threshold
Set the right value according to the
0= Blue background for TV and AV
1=Black background for TV and AV
Set the black
while no signal
Press "►◄" or "VOL+ VOL-" key
Serial No.
Page
Version
Remark
0=Aging mode off
1=Aging mode on
0=>1= Set the shopping status
Adjust this value to get the max
color synchronization range.
Don't adjust, use default value for
producing
0="FACTORY HOTKEY" off
1="FACTORY HOTKEY" on
ON=On when power on
STB=Standby when power on
LAST=Last power off status
0=>1=Active EEPROM initial
sales area
while no signal
while no signal
2=Snowy background for TV and
black background for AV while no
signal
Recommended value= "20"
to enter a sub-menu to do the
setup, and press "MENU" key the
previous menu
Page 12 of 17
4.0
Advertisement
Table of Contents
