Tekkeon MP3300 User Manual page 8

2. With the voltage lock in the unlocked position (switched right to VOLTAGE), set the voltage output
to the voltage selection that is equal to or one increment higher than the voltage identified for
your device. To do this, press the voltage selector until the voltage indicator turns on under the
appropriate voltage selection (3, 4.5, 5, 6, 7.5, 9, 12, 14 for MP3300 and 5, 6, 7.5, 9, 12, 14, 16, 19
for MP3400). For example, if your device requires 6V, set the voltage to 6. If your device requires
7.2V, set the voltage to 7.5.
It is important to set the voltage selector NO MORE than one step higher than the voltage requirement
for the portable device as an incorrect setting may prevent myPower ALL from working with your
device, or may harm your device in the rare instance that the device accepts the higher voltage.
However, for all devices, adjusting the voltage ONLY one step higher than required will not harm the
device.
The following table provides recommended voltage settings by device type.
Device Type
Notebook Computers
Portable DVD Players
Digital Cameras
CD Players
PDAs
Mobile Phones
Camcorders
MP3/MP4
6
myPower ALL VOLTAGE SELECTION
Voltage on Device
Power Adapter
14V
16V
19V
24V
9V
12V
5 - 6V
4.5 - 5V
5V
3.7 - 5V
9V
12V
5V
Suggested Voltage on
myPower ALL
12V
14V
14 - 16V
19V
7.5 - 9V
9 - 12V
5 - 6V
5V
5V
5V
7.5 - 9V
9 - 12V
5V