Bcb Board And Bracket - Lenovo ThinkStation PX Hardware Maintenance Manual

Screw (quantity)
6-32*3.8 mm, Zn coated (3)

BCB board and bracket

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the storage drives installed in the front access bay (if any). See "Hard disk drive in the front
access bay" on page 92 and "M.2 solid-state drive in the front access bay" on page 104.
2. Remove the left side cover. See "Left side cover" on page 72.
3. Remove the right side cover. See "Right side cover" on page 97.
4. Remove the storage drive fan. See "Storage fan assembly" on page 103.
Removal steps
Loosen the three screws to remove the BCB board and bracket.
Note: The three screws cannot be removed from the BCB board bracket.
102
PX Hardware Maintenance Manual
Color
Blue
Torque
3.0 ± 0.5 lb/in