Advertisement
Your Holmes® Cool Mist humidifier draws dry air through the air intake grill area. This air is then passed through a moisture–laden wick filter, which retains the minerals and deposits in the water. The resulting moist air is directed back into the room from the top air grill.
NOTE: This humidification system provides a cool, invisible moisture output. It is normal not to see the mist.
NOTE: A humidity level below 20% can be unhealthy and uncomfortable. The recommended humidity level is between 40%-50%.
With the filter installed correctly (plastic filter support cap placed on top of the filter - see Figure 1), front door closed, the tanks filled and the plug correctly inserted in the outlet, you are now ready to operate the humidifier.
NOTE: The humidifier produces clean, cool, INVISIBLE moisture. It is normal not to see the moisture.
Digital Humidistat Control
Your humidifier is equipped with a digital humidistat that allows you to set your humidifier to your desired comfort level by pressing the +/- buttons to adjust the humidity level ranging from 45% to Stay On setting. The corresponding Humidity Indicator will illuminate once selected. When the room humidity level rises above the set humidity, the humidifier will stop. When the room humidity level drops below the set humidity, the humidifier will turn on automatically to maintain the preset humidity level.
NOTE: When the water tank is empty, and the base is almost empty, you need to refill the tank. The fan will continue to run to help dry the humidifier. Shut off and unplug the unit. Please follow the Daily Cleaning Instructions. Refill the tank as directed in Filling the Water Tanks Instructions.
NOTE: If moisture forms on the walls or windows, turn off the humidifier.
Through normal use, waterborne minerals and sediment become trapped in the wick filter. The harder your water, the greater the amount of minerals in the water, and the more often you will need to change your filter.
Filter Life – Under normal conditions of continuous use, a brand new filter will operate efficiently for 1 month. It is strongly recommended that a new filter be replaced every 30 days of use.
To replace the filter, follow the steps below:
It will take about 30 minutes for the humidifier to reach maximum output.
NOTE: You can purchase replacement filters (model HWF75 / SF221) at a local retailer, by calling 1-888-264-9669, or by visiting www.holmesproducts.com. It is recommended that a replacement filter is purchased for uninterrupted use.
Humidifiers provide comfort by adding moisture to dry, heated indoor air. To benefit most from the humidifier and avoid product misuse, follow all instructions carefully. Please note that this is an electrical appliance and requires attention when in use.
In addition, if you do not follow the recommended care and maintenance guidelines, micro-organisms may be able to grow in the water within the water tank. You must routinely follow the cleaning procedures that follow in order to ensure proper, efficient operation of your humidifier. Proper maintenance and cleaning is essential to the continued performance of your unit and the avoidance of algae or bacteria build-up.
Daily Maintenance
Weekly Maintenance To Remove Scale:
To Disinfect Humidifier Base Tanks:
TROUBLE | PROBABLE CAUSE | SOLUTION |
Unit does not turn on | Not plugged in. Outlet not functioning. | Plug in unit. Have outlet replaced by a licensed electrician. |
Mist output insufficient or none | Speed setting is on LO The filter has not absorbed water. Filter support cap not positioned correctly. | Operate on HI setting. Wait 30 minutes for filter to absorb water. Support cap should rest on top of filter. |
Filter turns brown | The filter has absorbed minerals. | Replace your filter (HWF75/SF221) by calling 1-800-546-5637, or visiting www.holmesproducts.com. |
Question | Answer |
What are the variables that affect run time? | The estimated run time for this humidifier is based on average room conditions. The actual run time of your humidifier is dependent on numerous variables such as: Air exchange in the room where the humidifier is placed. Room construction of the room where the humidifier is placed. Temperature of the room where the humidifier is placed. Humidity levels in the room where the humidifier is placed. Movement of occupants and the opening and closing of doors in the room where the humidifier is placed. Home furnishings in the room where the humidifier is placed. |
How do I remove film on water tank? | See Daily Maintenance instructions. Regular cleaning is recommended. |
How can I extend the run time? | Run your unit on the lowest setting. If your unit has electronics, set it to your desired humidity level. The unit will turn on and off, which will extend the run time. Fill the tank all the way full, place it on the base, let the water empty into the base until it stops bubbling, then refill the tank full again. This ensures maximum water capacity and will extend run time. |
If your humidifier will not be in use for two days or more, follow these instructions.
To order the replacement accessories you can do any of the following:
If you have any questions regarding your product or would like to learn more about other Holmes® products, please contact our Consumer Service Department at 1-800-546-5637 or visit our website at www.holmesproducts.com.
© 2013 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.
Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the HM3855L that isn't answered in the manual? Leave your question here.