M3057-PLR Mk II Dome Camera
Configure your device
Configure your device
Basic settings
Set the capture mode
1. Go to Video > Installation > Capture mode.
2. Click Change.
3. Select a capture mode and click Save and restart.
See also Capture modes on page 47.
Set the mounting position
1. Go to Video > Installation > Mounting position.
2. Click Change.
3. Select a mounting position and click Save and restart.
Set the power line frequency
1. Go to Video > Installation > Power line frequency.
2. Click Change.
3. Select a power line frequency and click Save and restart.
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 47.
Rotate the image with digital roll
Note
If you rotate the image, all views are affected.
To rotate the 360° view, go to Video > Installation and use the Roll slider.
You can also enter a value for the roll angle in the text field.
Configure the quad view
Note
Quad view is available in these mounting positions:
• Desk
• Ceiling
1. Click
2. Select Quad view among the live feed sources.
3. Go to Settings > System > Orientation and click
and select Legacy device interface.
.
6