Table of Contents
Advertisement
M3057-PLR Mk II Dome Camera
Specifications
Specifications
Product overview
1
IR illumination
2
Lid
3
Status LED indicator
4
Control button
5
I/O connector
6
SD card slot
7
Mounting bracket
8
D-coded M12 connector, female
LED indicators
Note
The Status LED can be configured to flash while an event is active.
Note
The LEDs turn off when you close the casing.
Status LED
Unlit
Green
Amber
Amber/Red
Red
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Flashes green during wireless network pairing.
Steady green for normal operation.
Flashes before startup if the temperature is below -20 °C and heating is required. The product
starts when it reaches operating temperature.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Steady during startup. Flashes when restoring settings.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
53
Advertisement
Table of Contents
