How Do I Use My Appliance And The Attachments - Philips S9985/50 Manual

32
English
Unplug for use symbol
Charging in the charging stand (specific models only)

How do I use my appliance and the attachments?

2 Insert the small plug into the appliance and put the
supply unit in the wall socket.
- While the appliance is charging, an animation
appears on the display showing the progress.
- When the appliance is fully charged, the battery
percentage shows 100 % and the battery icon
shows the battery being full.
3 After charging, remove the supply unit from the wall
socket and pull the small plug out of the appliance.
The 'unplug for use' symbol displays to remind you to
disconnect the appliance from the wall socket and
remove the small plug from the appliance before you
switch it on.
1 Make sure the appliance is switched off.
2 Put the small plug in the charging stand and put the
supply unit in the wall socket.
3 Place the appliance in the charging stand.
Specific models only: The light ring on the bottom of
the charging stand lights up and rotates quickly.
- After approximately 5 minutes, the light ring
rotates slower. The battery now contains enough
energy for one full shave.
- As the appliance continues to charge, the light
ring becomes brighter and rotates slower.
- When the appliance is fully charged, the light ring
lights up fully and stops rotating.
Warning: Always check the appliance and all
accessories before use. Do not use the appliance
or any accessory if it is damaged, as this may cause
injury. Always replace a damaged part with one of
the original type.