Philips S9985/50 Manual page 49

Problem
The appliance
does not shave as
well as it used to.
Water is leaking
from the bottom of
the appliance.
Philips Quick Clean Pod
Problem
My shaver isn't clean
after using the Philips
Quick Clean Pod.
Possible cause
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt
obstruct the
shaving heads.
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
Possible cause
You removed the shaver
before the cleaning
program was finished.
The Philips Quick Clean
Pod Cartridge needs to
be replaced.
The Philips Quick Clean
Pod is tilted.
Solution
Clean the shaving heads
thoroughly or replace them.
Replace the shaving heads (see
'Replacing the shaving heads').
Clean the shaving heads
thoroughly (see 'Thorough
cleaning').
This is normal and not dangerous
because all electronics are
enclosed in a sealed power unit
inside the appliance.
Solution
Leave the shaver in the
Philips Quick Clean Pod
for the full cleaning
program. Each cleaning
program takes
approximately 1 minute.
The cleaning icon goes
out when the cleaning
program is finished.
Replace the Philips
Quick Clean Pod
Cartridge.
Place the Philips Quick
Clean Pod on a flat
surface.
49
English