Philips S9985/50 Manual page 39

Thorough cleaning
7 Close the shaving unit.
We advise you to clean the shaving heads thoroughly
once a month or when the shaver does not shave as well
as it used to.
1 Make sure that the appliance is switched off and
disconnected from the wall socket.
2 Press the release button on the shaving unit and pull
the shaving head holder off the shaving unit.
3 Rinse the hair chamber and shaving head holder
under the tap.
4 Remove the shaving heads. For detailed instructions,
see 'How do I replace the shaving heads?'.
Note: Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the shaving unit. For
detailed instructions, see 'How do I replace the
shaving heads?'.
39
English