Treatment Modes - Braun PL3011 Manual

Thanks to the built-in, intelligent SensoAdapt
need for the user to make any manual adjustment for skin tone. The skin tone chart on page 3 is displayed
also on the sales box as a guidance to potential purchasers to determine if the device will work on their
skin colouration. This does not relate to the Fitzpatrick scale, it is simply a color guide.
Number of Power bar lights illuminated
Max. energy (J/cm²)
c) Press the treatment button (5). The device will flash and a warm sensation should be felt.
If you find the treatment uncomfortable, you can reduce the light intensity using the sensitive mode
button (4). The sensitive mode indicator lights up when it is activated. To deactivate it, press the
sensitive mode button again.
The power bars flash to confirm a change in the light intensity setting.
When holding the sensitive mode button (4) longer than 3 seconds, the device is deactivated.
After 10 minutes without use, the device is automatically deactivated. To re-activate, press
any button.
d) Move the treatment window to the next area to be treated and repeat. The device needs to recharge
between flashes. This will take less than a second.
e) Ensure that the entire area receives treatment, but DO NOT treat an area twice (overlapping flashes).
If the device is used in high ambient temperatures for extended treatment sessions, short pauses in
treatment may be seen to allow cooling. This is normal and operation will resume once the device is
cooled.

8 Treatment Modes

The area to be treated has to be hair-free, clean and dry. Before pressing the treatment button, look away
from the device to avoid the bright light. In seldom cases, a user may find the flash too bright, however
there is no safety risk associated with this. For increased comfort, we recommend treating in a well-lit
room to help reduce the perceived brightness.
GLIDING
for fast and efficient
treatment of large areas
(e.g. legs).
1. Place the treatment window (1) firmly on your skin, ensuring both skin sensors (2) have skin contact.
Power bars (3) show white LEDs.
2. Press and hold the treatment button (5).
The device will begin to flash.
light skin tone U high power setting
dark skin tone U low power setting
no lights
no skin contact U device cannot be activated
red light invalid skin tone U device cannot be activated
TM
, which automatically measures the skin color, there is no
3
4.21
STAMPING
for treating small,
hard-to reach areas
(e.g. face for females,
bikini line, underarms,
knee, chin, ankles)
2. Press and instantly release the treatment
button (5). The device will emit a flash.
2 1
3.99 3.77
11