Preparation Before Operation - Mitsubishi Electric MSZ-AY15VGK Operating Instructions Manual

● OPERATING INSTRUCTIONS ●
N
ame of Each Part
Indoor unit
Front
panel
Air fi lter
Air cleaning fi lter
(V Blocking Filter,
VGKP type: option)
EN
Spec name plate *1
Horizontal vane
Fan guard
Air outlet
Heat exchanger
Operation
indicator lamp
Remote control
receiving section
P
reparation Before Operation
Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on.
Installing the remote controller batteries
4.
Press the reset
button.
1.
Remove the front lid.
EN-4
Air purifying device
(VGKP type only)
Air inlet
Wi-Fi interface
Emergency
operation switch *2
*2
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation switch (E.O. SW)
on the indoor unit.
Each time the E.O. SW is pressed, the operation changes in the following order:
Emergency
cooling operation
2.
Insert the negative
pole of AAA
alkaline batteries fi rst.
3.
Install the front lid.
Outdoor unit
Outdoor units may be diff erent in appearance.
*1 The manufacturing year and month are indicated on the spec name plate.
Emergency
heating operation Stop
Setting current time
1.
Press the clock button.
4.
Press the clock
button again.
Air inlet (back and side)
Spec name plate *1
Refrigerant piping
Drainage hose
Air outlet
Drain outlet
Set temperature : 24°C
: Lit
Fan speed : Medium
: Not lit
Horizontal vane : Auto
3.
Press the day button
to set the day.
2.
Press either the time button
or the timer buttons to set the
time.
Each press changes the clock
1 minute forward/backward (10
minutes when pressed longer).