THOMSON grass valley LDK 6000 MKII Series User Manual page 7

Advanced TriaxHD Features
TriaxHD, which is a further development of the Emmy Award
winning triax transmission system, makes the camera compatible
with industry standard triax cables. This allows the reuse of
existing, reliable and valuable cable inventories.
TriaxHD allows video transmission and remote control of cameras
up to a distance of 3300 ft (1000 meters) and beyond, using
industry standard 14mm triax cables. It is based on 30MHz full-
bandwidth 4:2:2 transmission (Y/Cr/Cb components).
The double side band modulation technique used in combination
with Y/Cr/Cb transmission ensures linearity, resolution and an
optimal signal-to-noise ratio over the maximum cable length.
Bandwidth efficient channel combining and equalization
techniques minimize cross-talk and interference. Teleprompter
and viewfinder signals maintain high performance with relatively
long cable lengths.
The communication facilities provide for two-wire or four-wire
high quality intercom signals. Full camera control is provided via
a Series 9000 Universal Camera Control system or a C2IP
Ethernet-based control network.
The TriaxHD adapter is equipped with a rotary triax connector
which provides freedom of movement during portable use of the
camera and protects the connector from being damaged in near-
floor conditions.
TriaxHD Base Station
The TriaxHD Base Station, besides high definition outputs,
optionally offers simultaneous high-end SDTV outputs. This
facilitates a gradual and managed transition from SDTV to HDTV.
Introduction Operator's Manual - LDK 6000 mkII 1-3