Security And Access; Sdi Hd Adapter Video Outputs - THOMSON grass valley LDK 6000 MKII Series User Manual

Security and Access

Smart card slot
1
Insert your smart card into this slot with the chip on the card
facing the front of the camera. Push the card home until it fits
snugly.
There are two types of card; an owner card and a user card.
Both cards store operator files and scene files.
The owner card can be used to change the user level of the
camera. The user level determines which set of controls and
functions can be changed by the camera operator. Refer to
Section 6 for more information on the smart card.
A smart card is not required for normal operation of the
camera.
Note: Only use an original camera card.
Store the owner card in a safe place.
4-4
1
Operator's Manual - LDK 6000 mkII

SDI HD adapter video outputs

1
DC out
5
1
Viewing channel output connector (HD-SDI)
This BNC connector supplies a serial digital video output (Y/
Cr/Cb 4:2:2) for monitoring purposes.
2
Multicore connector
This multicore connector provides the HD video output,
viewing channel output signals, control signals and the
camera microphone signal. DC power can also be supplied
to the camera via this connector. The connector accepts a
playback video signal for display in the viewfinder. The start/
stop control signal for an external recorder is also passed via
this connector.
3
HD Video output connectors
These BNC connectors together supply the HD video output
for a recording system or for a post-production suite.
4
Viewfinder output connector
This BNC connector supplies an analog video output signal
of the viewfinder signal.Markers and menus similar to those
in the viewfinder can be superimposed on this signal.
5
Viewing channel output connector (CVBS)
This BNC connector supplies a CVBS output signal for
viewing.
2
3
LCP CVBS VF
4
Location of Controls