Table of Contents
Advertisement
5.3 Installing the monitor
1
4
7
1 - Position the wall bracket so that the screen of the monitor is approximately 1.60m above the
fl oor.
2 – Mark the location of the holes using the monitor bracket.
3 – Drill.
4 – Use pegs adapted to the bracket (those supplied are suitable for solid walls).
5 - Attach the wall bracket.
6 – Connect the two intercom panel wires and the two power supply wires following the wiring
diagram.
7 - Position the monitor on the wall bracket.
Warning:
for this step, do not connect the 230VAC power supply.
6
1m60
2
5
Philips - Lite - V1
3
DES 9900 VDP
-
+
1
2
6
Advertisement
Table of Contents
