The Control Panel; Residual Heat Indicator - Bosch PXX8 D3 E Series Instruction Manual

The control panel

Touch controls
Switch the appliance on and off
#
Locking the control panel for cleaning/switching on
>Š
the childproof lock
Select a hotplate
ã
Set the heat settings/set the ventilation system
0 1 Ê 2 Ê ... Ê 8 Ê 9
Switch on the keep-warm function
Û
Activate automatic mode with sensor-controlled venti-
w
lation/activate the automatic function with sensor-
controlled run-on
Switch between the settings areas for the hob and the
:
ventilation system/reset the saturation indicators
Switch on the flexible cooking zone
è
Activate the Move function
ç
Switch on the frying sensor
é
Switch on the PowerBoost and ShortBoost functions
á
for heat settings/switch on intensive mode for the
ventilation system
Programme the kitchen timer
t
Set the cooking time
y
Switch on the stopwatch function
x
Indicators/symbols
Control panel locked for cleaning/childproof lock
>Š
Operating status
‹ . ‹
Heat settings/fan settings
‚ - Š
Residual heat
• / œ
Cooking functions
å
Ventilation system
:
Automatic mode for the ventilation system
w
Flexible cooking zone
è
Move function
ç
Frying sensor
é
Intensive mode for the ventilation system
á
Kitchen timer
t
Set the cooking time
y
Stopwatch function
x
PowerBoost function
› .
Getting to know your appliance
Indicators/symbols
ShortBoost function
˜› .
Keep-warm function
–©
Temperature for cooking functions
‹‹‹ ºC
Timer function
‹‹
Time units on the timer
ö / ô
Energy consumption
÷
Metal grease filter saturation indicator
"‚ ‹
Activated charcoal filter saturation indicator
"‚ ‚
Controls
When the hob heats up, the symbols for the controls
available at this time light up.
Touching a symbol activates the respective function.
Notes
The corresponding symbols for the controls light up
■
depending on whether they are available.
The displays for the hotplates or the selected
functions get brighter.
Always keep the control panel clean and dry.
■
Moisture can prevent it from working properly.
Do not place any cookware near the indicators or
■
sensors. The electronics could overheat.

Residual heat indicator

The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display : High temperature
•
■
Display : Low temperature
œ
■
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
en
11