Operating An Application Using Connected Service; Downloading An Application To The System - Toyota Land Cruiser 150 2014 Manual

2. CONNECTED SERVICE

7. OPERATING AN APPLICATION USING CONNECTED SERVICE*

DOWNLOADING AN
APPLICATION TO THE
SYSTEM
To download an application, a USB
memory that contains the application
data is required. For details about an
application, refer to Toyota portal site
(www.my.toyota.eu).
1
Open the cover and connect a USB
memory.
Turn on the power of the USB memory if it
is not turned on.
2
Select "Yes" when the confirmation
screen appears.
3
Select "Enter Key" and then enter the
license key.
If the license key is invalid, the application
will not be downloaded.
4
Select "Confirm".
5
Check that the updating screen is dis-
played.
296
INFORMATION
●
Downloading may not complete cor-
rectly in the following cases:
• Vehicles without a smart entry & start
system: If the engine switch is turned
to the "LOCK" position during down-
loading
• Vehicles with a smart entry & start sys-
tem: If the engine switch is turned off
during downloading
• If the USB memory is removed before
downloading is complete
*: Navigation system only
LC150_Navi+MM_OM60M22E_(EE)
14.05.12 18:48