1. SETUP OPERATION
CHANGING BETWEEN DAY
AND NIGHT MODE
Depending on the position of the head-
light switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1
Display the display settings screen.
(→P.173)
2
Select "Day mode".
INFORMATION
●
If the screen is set to day mode with the
headlight switch turned on, this condition
is memorized even when the engine
switch is in the following status.
Vehicles without a smart entry & start
system
The engine switch is turned to the
"LOCK" position.
Vehicles with a smart entry & start sys-
tem
The engine switch is turned off.
174
ADJUSTING THE CAMERA
DISPLAY
The contrast and brightness of the
camera display can be adjusted.
1
Display the display settings screen.
(→P.173)
2
Select "Camera".
3
Select
or
to adjust the contrast
or brightness.
No.
Function
: Increases
contrast of the screen
Contrast
: Decreases
contrast of the screen
: Brightens
screen
Bright-
ness
: Darkens
screen
INFORMATION
●
Contrast and brightness can be adjusted
by touching and dragging the marker on
the screen with your finger or touching
the desired position on the scale.
LC150_Navi+MM_OM60M22E_(EE)
the
the
the
the
14.05.12
18:48