Toyota Land Cruiser 150 2014 Manual page 251

REGISTERING FROM AN
EXTERNAL DEVICE
■
LOADING POIs AND ROUTES VIA A
USB MEMORY
"vCards" formatted data can be trans-
ferred from a USB memory to this sys-
tem. Transferred POIs and routes will
be stored in the "Stored" list on the "My
destinations" screen. (→P.247)
1
Open the cover and connect a USB
memory.
2
Display the "Navigation" menu screen
and select "Enter
(→P.208)
3
Select the "Advanced" tab.
4
Select "Load POIs and routes from
USB".
5
Check that a progress bar is being dis-
played while the data loading is in
progress.
To cancel this function, select "Cancel".
6
Check that a confirmation screen is
displayed when the operation is com-
plete.
7
Check that the entry is registered in the
"Stored" list on the "My destinations"
screen. (→P.247)
INFORMATION
●
Downloading may not complete cor-
rectly in the following cases:
destination".
• Vehicles with a smart entry & start sys-
tem: If the engine switch is turned off
during downloading.
• Vehicles without a smart entry & start
system: If the engine switch is turned
to the "LOCK" position during down-
loading.
• If the USB memory is removed before
downloading is complete
●
If the maximum number of possible
stored contacts has been reached, a
confirmation screen appears.
Delete contact(s) to make room for new
contact(s). (→P.140)
LC150_Navi+MM_OM60M22E_(EE)
5. MY DESTINATIONS
5
251
14.05.12 18:48