Hardware Connections - TRENDnet TEW-673GRU User Manual

Hardware connections

Connecting the WLAN Router
1. Plug in one end of the network cable to the WAN port of the WLAN Router.
2. Plug in the other end of the network cable to the Ethernet port of the xDSL or
Cable modem.
3. Use another network cable to connect to the Ethernet card on the computer
system; the other end of the cable connects to the LAN port of the WLAN
Router. Since the IEEE 300Mbps Wireless N Dual Band Gigabit Router with
USB Port has four ports, you can connect up to four computers directly to the
unit. Then you do not have to buy a switch to connect these computers since one
WLAN Router functions both as a connection-sharing unit and as a switch.
9