Table of Contents
Advertisement
WAN IP: Select whether user wants to specify an IP address manually, or want to
obtain an IP address automatically. When Specify IP is selected, type the IP address,
subnet mask, and default gateway in the text boxes. User's ISP will provide with
this information.
DNS 1-2: Type up to 2 DNS numbers in the text boxes. User's ISP will provide this
information.
MAC Address: If required by user's ISP, type the MAC address of the WLAN
Router WAN interface in this field. Or click on CLONE MAC Address to
automatically enter your PC's MAC address.
Password
This screen enables users to set administrative and user passwords. These
passwords are used to gain access to the WLAN Router interface.
Administrator: Type the password the Administrator will use to log into the
system. The password must be typed again for confirmation. The Administrator
have the ability to apply and setting on the WLAN Router.
User: Type the password the User will use to log in to the system. The password
must be typed again for confirmation. The User accounts only have the ability to
view settings and cannot apply any setting changes.
26
Advertisement
Table of Contents
