Table of Contents
Advertisement
Item
2
PCIe expansion card riser (slot 1)
3
PCIe expansion card riser (slot 2)
4
USB 2.0 port
5
Power supply unit (FRU)
6
USB 3.0 port
7
remote management dedicated port
8
System identification button
9
Adapter cards ports
10
OCP NIC ports
11
NIC ports
Interfaces Detailed Description
Power-On LED
There is one I/O LED (green) on the front panel, to indicate whether the system is powered.
•
For Power-On LEDs definitions, please refer
USB 2.0 and 3.0 Interfaces
MetroX-3 XC offers four USB 3.0 ports on the system's front panel, and two USB 2.0 ports on the
system's rear panel.
The USB interfaces can be used to provide bandwidth of up to 500MB/s to shorten the time of data
transmission.
Interface
Description
The expansion card riser enables to connect PCIe
expansion cards
The expansion card riser enables to connect PCIe
expansion cards
USB 2.0-compliant
PSU 2
USB 3.0-compliant
The remote management is designed for secure local
and remote server management, and helps IT
administrators deploy, update and monitor the device.
Press the system ID button:
•
To locate a particular system within a rack
•
To turn the system ID on or off
•
To reset remote management (press and hold
for more than 16 seconds)
To reset remote management using system
ID, ensure that the system ID button is
enabled in the remote management setup.
If the system stops responding during POST,
press and hold the system ID button (for
more than 5 seconds) to enter the BIOS
progress mode.
3x ConnectX-7 adapter cards
2x 10GbE Base-T ports
2x 1GbE Base-T ports
to Power-On LEDs
Specifications.
9
Advertisement
Table of Contents
