Table of Contents
Advertisement
•
Three ConnectX-7 network interface cards (NICs) which enable the hardware-based
forwarding of IP packets from the InfiniBand to Ethernet, and vice versa.
•
Two redundant, load-sharing power supply units at the rear side of the system. The PSUs are
housed in a 2U canister. Each PSU has an extraction handle, PSU status LED and a power
socket.
•
One fan per power supply unit on the rear panel of the appliance.
•
Six internal fans for cooling the CPU and expansion cards. Under normal operation, the
cooling fans operate at a constant speed. If the system module fails or one of the
temperature thresholds is exceeded, the cooling fans automatically raise their rotation
speeds to draw more airflow.
Management Interfaces, PSUs, and Fans
Processor System
Rear I/O Panel
On-board Devices
Expansion slots
Cooling
PC Health
Monitoring
System Features
For a full list of features, please refer to
Operating Systems
NVIDIA MetroX-3 XC includes the NVIDIA Gateway Operating System, MLNX-GW, which manages the
appliance and handles the high availability and load balancing between the ConnectX cards and
Intel Xeon Gold 6240R /2.4GHz /36MB /24 Cores 185W TDP
CPU Type
DIMMs DDR4 3200MHz ECC
Memory Type
12 x 8GB
Memory Size
Error Detection
1x USB 3.0 and 1x USB 2.0
USB
4 x RJ-45 LAN ports:
RJ-45/LAN
Sharing with the LAN 1/4.
Remote
Management Port
3x Network Interface cards
PCI-Express
4 dual set hot swappable internal fans for CPU and expansion
Chassis Fan
cards cooling.
One fan per power supply unit
PSU Fans
Monitors for CPU Cores, +3.3V PG, +5V PG, 1.05 PG, VBAT PG
Voltage
Monitoring for CPU0 & CPU1 (PECI)
Temperature
Monitoring for System (HWM)
Chassis intrusion detection
Other Features
(Case Open)
the system's
•
Corrects single-bit errors
•
Detects double-bit errors (using ECC memory)
•
2x 10GbE
•
2x 1GbE/IPMI-LAN
datasheet.
6
Advertisement
Table of Contents
