Software Requirements
See Operating
Systems section under the Introduction section
Unpacking the Package
Safety Precautions
The NVIDIA MetroX-3 XC is installed in systems that operate with voltages that can be lethal. Before
opening the case of the system, observe the following precautions to avoid injury and prevent
damage to system components.
•
Remove any metallic objects from your hands and wrists.
•
Make sure to use only insulated tools.
•
Verify that the system is powered off and is unplugged.
•
Place the ESD mat on the floor where working and put on the ESD strap. Make sure the ESD
strap is touching your skin and that the other end is connected to a verified ground.
Package Contents
Unpack the system, and make sure that all the parts have been sent against the parts list below.
Check the parts for visible damage that may have occurred during shipping.
The appliance comes packed with the following items:
•
1X – bezel
•
1X – appliance
•
2X – installation rails, one right hand and one left hand
•
2X – power cable per PS unit (type C13-C14)
•
1X – Ethernet CAT6A cable (RJ45-to-RJ45), 2m
17