Siemens Gigaset E450 SIM Manual page 89

SMS (text messages)
Sending an SMS
s / C
~
/
Select number with area code
(even if you are in that area)
from the directory or call-by-
call list or enter it directly. For
SMS to an SMS mailbox: put
the mailbox ID at the end of
the number.
Press the display key.
§Options§
Select. The SMS is sent.
Send
Notes:
– If you are interrupted by an external call
while writing an SMS, the text is automati-
cally saved in the draft message list.
– If the memory is full, or if the SMS function
on the base is being used by another hand-
set, this cancels the operation. An appropri-
ate message appears in the display. Delete
SMS messages you no longer require or
send the SMS later.
Setting input language
¤
You are writing an SMS (page 25).
Press the display key.
§Options§
Select Language
Select and press
s
Select input language and
press
§OK§
a
Press the end call key briefly
to return to the text panel.
The input language setting only applies to
the current SMS.
SMS status report
Requirement: Your service provider sup-
ports this feature.
If you have activated the status report, you
will receive a message with a confirmation
text after you have sent your SMS.
26
.
§OK§
.
Activating/deactivating the status report
¢ ¢
v î
Settings
Status Report
Select and press
Reading/deleting a status report
¤
Open the incoming message list
(page 28) and then:
q
Select SMS with the status
State OK
Press the display key.
§Read§
Or:
Press the display key. The text
§Delete§
message is deleted.
Draft message list
In the draft message list, you can save,
edit later and send an SMS.
Saving an SMS in the draft message list
¤
You are writing an SMS (page 25).
Press the display key.
§Options§
Save Entry Select and press
Opening the draft message list
¢ ¢
v î
(Mailbox, mailbox PIN)
¢
Outgoing (3)
The first list entry is displayed, e.g.:
1234567890
21.09.05 09:45
Reading or deleting individual SMS
¤
Open the draft message list and then:
q
Select SMS.
Press the display key.
§Read§
The entry will be displayed.
Scroll line by line using q.
Or:
Press the display key. The text
§Delete§
message is deleted.
‰
( = on).
§OK§
or
State not OK.
.
§OK§