This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Small plastic scribe
Subscriber Identity Module(SIM) board
Installing the Subscriber Identification Module (SIM) card
1
Follow the procedure in
After working inside your
2
Insert a paperclip or a SIM card removal tool into the pinhole [1].
3
Pull the SIM card tray to remove it [2].
4
Place the SIM card on the SIM card tray.
5
Push the SIM card tray into the slot until it clicks into place.
Removing the Subscriber Identification Module (SIM) card
CAUTION:
Removing the SIM card when the computer is on may cause data loss or damage the card. Ensure your computer is
turned off or the network connections are disabled.
1
Insert a paperclip or a SIM card removal tool into the pinhole on the SIM card tray.
2
Pull the SIM card tray to remove it.
3
Remove the SIM card from the SIM card tray.
Removing and installing components
computer.
Removing and installing components
3
13