Installing Display Hinge; Display Panel; Removing Display Panel - Dell P72G Owner's Manual

Installing display hinge

1 Place the display hinge on the display assembly.
2 Tighten the M2.5*3 screws to secure the display hinge to the display assembly.
3 Repeat step a and step b to install the other display hinge.
4 Install the:
a display bezel
b display assembly
c WLAN card
d battery
e base cover
5 Follow the procedure in

Display panel

Removing display panel

The following procedure is applicable only if your computer is a non-touch computer.
1 Follow the procedure in
2 Remove the:
a base cover
b battery
c WLAN card
d display assembly
e display bezel
3 Remove the M2*3 screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access the
eDP cable [2].
44 Removing and installing components
After working inside your computer.
Before working inside your computer.