Battery
Removing battery
1
Follow the procedure in
2
Remove the
base
cover.
3
To remove the battery:
a
Disconnect the battery cable from the connector on the system board [1].
b Unroute the battery cable from the routing channels.
c
Remove the M2*6 captive screw that secures the battery to the computer [2].
NOTE:
d Lift the battery from the computer [3].
Installing battery
1
Insert the battery into the slot on the computer.
2
Route the battery cable through the routing channels.
3
Tighten the M2*6 captive screw to secure the battery to the computer.
4
Connect the battery cable to the connector on the system board.
5
Install the
base
cover.
6
Follow the procedure in
Before working inside your
6-cell battery has 2 screws.
After working inside your
computer.
computer.
Removing and installing components
15