Table of Contents
Advertisement
The display shows the indicator
(cold), and the indicator
spin) and the indicator
• Activate the spin-only option
(Skipping the wash and rinse
phases): Pouze odstřeďování.
Before setting this option,
select a suitable washing
programme for the
garments. The appliance
will performs the most
fitting spin cycle for your
garments care (e.g. For
synthetics items, first
select the Syntetika
washing programme and
then the Pouze
odstřeďování option).
The appliance performs only the
spinning phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator
spin speed.
8.5 Skvrny/Předpírka
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
• Skvrny
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
will be added in the appropriate phase
of the washing programme.
This option is not
available with a
temperature lower than
40 °C.
• Předpírka
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
(no
.
and the
. The stain remover
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
8.6 Jemné+
Set the Jemné+ option to ensures perfect
distribution of the fabric softener and
improves the fabric softness.
This option increases slightly
the programme duration.
8.7 Odložený start
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pauza button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
8.8 Máchání
With this button you can select one of the
following options:
• Extra máchání option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
• Skipping wash phase - Pouze
máchání
option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
8.9 Úspora času
With this option you can decrease the
programme duration.
ENGLISH
15
and
Advertisement
Table of Contents
