Advertisement

Quick Links

L6FLG49SCA
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for AEG L6FLG49SCA

  • Page 1 L6FLG49SCA User Manual Washing Machine USER MANUAL...
  • Page 2: Table Of Contents

    9. THE AUTODOSE TECHNOLOGY (AUTODOSING).......... 21 10. PROGRAMMES ....................28 WI-FI - CONNECTIVITY SETUP..............32 12. DAILY USE....................... 35 13. HINTS AND TIPS....................39 14. CARE AND CLEANING..................40 15. TROUBLESHOOTING..................48 16. CONSUMPTION VALUES................51 17. QUICK GUIDE....................53 18. ENVIRONMENTAL CONCERNS..............55 My AEG Care app...
  • Page 3: Safety Information

    ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 4 Children between 3 and 8 years of age and persons • with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept •...
  • Page 5: Safety Instructions

    If a tumble dryer is stacked on the top of the washing • machine, make sure to use the correct stacking kit approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation than 0°C or where it is exposed to the...
  • Page 6 Service Centre to ensure which • When unpacking the appliance, It is accessories can be used. possible to see water flowing from the drain hose. This is due to the testing 2.2 Electrical connection of the appliance with the use of water in the factory.
  • Page 7: Technical Data

    ENGLISH circuit boards, electronic displays, applications and are not suitable for pressure switches, thermostats and household room illumination. sensors, software and firmware 2.6 Disposal including reset software, door, door hinge and seals, other seals, door WARNING! locking assembly, plastic peripherals Risk of injury or suffocation.
  • Page 8 It gives The washing programme is tailored to the highest use flexibility. the laundry load and the type of fabric • The Wi-Fi connection and Remote without consuming more time, energy Start enable you to start a cycle, to and water than necessary.
  • Page 9: Installation

    ENGLISH 5. INSTALLATION the hose holders. WARNING! Refer to Safety chapters. 5.1 Unpacking 1. Open the door. Remove all the items from the drum. WARNING! It is possible to see water flowing from the drain hose. This is because the washing machine has been tested at the factory.
  • Page 10 5.2 Positioning and levelling 1. Install the appliance on a flat hard floor. Make sure that carpets do not stop the air circulation below the appliance. Make sure that the appliance does not touch the wall or other units.
  • Page 11 ENGLISH CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose. 2. On the edge of a sink - Fasten the guide to the water tap or to the wall.
  • Page 12: Accessories

    6. ACCESSORIES 6.1 Available in Only appropriate www.aeg.com/shop or from accessories approved by authorised dealer AEG ensure the safety standards of the appliance. If Read carefully the instructions supplied unapproved parts are used, with the accessory. any claims will be...
  • Page 13: Control Panel

    If you install the appliance on a plinth under the washing machine. that is not an accessory supplied by Verify the compatible AEG, secure the appliance in the fixing stacking kit by checking the plates. depth of your appliances. Read carefully the instructions supplied with the accessory.
  • Page 14 The options are not selectable with all washing programmes. Check the compatibility between options and washing programmes in the "AutoDose and options compatibility with programmes" paragraph in the "Programmes" chapter. An option can exclude another one, in this case the appliance doesn't allow you to set the incompatible options together.
  • Page 15 ENGLISH Press this button repeatedly to activate one of the two options or both. The relevant indicator comes on. • Intenzivní By setting this option, the indicator appears close to deter‐ gent symbol, and the appliance will automatically dose an ex‐ tra amount of detergent when automatic detergent tank is ena‐...
  • Page 16 Press this button repeatedly to activate one of the two options or both. The relevant indicator comes on in the display. • Remote Select this option to connect appliance with App. Touch this button, the display shows the indicator blink‐...
  • Page 17 ENGLISH When you set a programme, the appliance automatically selects the maximum spin speed. Touch this button repeatedly to: • Decrease the spin speed. The display shows only the spin speeds avail‐ able for the set programme. • Activate the Rinse Hold option . The water of the last rinse is not drained out to prevent the fab‐...
  • Page 18 By means of Odstřeďování touch button, you can also set: • Pouze vypouštění Activate the drain-only option (Skipping the wash, rinse and spin phases): The appliance performs the only draining phase of the selec‐ ted washing programme. The display shows the indicator...
  • Page 19 ENGLISH With this option you can prevent that the children play with the control panel. To activate/deactivate this option, touch the Intenzivní/Předpírka and the Volba buttons simultaneously until the indicator comes on/goes off on the display. You can activate this option: Child Lock •...
  • Page 20 Remote connection indicator. Wi-Fi connection indicator. Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). • Warning code (e.g. Washing phase indicator. It flashes during pre-wash and wash phase.
  • Page 21: Before First Use

    ENGLISH These indicators will appear next to detergent tank and softener tank indicators when increasing or decreasing the automatic deter‐ gent or softener dosage. 8. BEFORE FIRST USE 3. Make sure to fill the AutoDose tanks During installation or before with liquid detergent and fabric first use you may observe...
  • Page 22 In some programmes, AutoDose AutoDose is OFF (OFF is on and the indicators and/or Manual are off in the display) because there are garments requiring special detergents or treatments. When OFF is on, pour the detergent and other treatments in the proper manual filling compartment.
  • Page 23 ENGLISH 9.3 AutoDose basic setting 1. Identify the water hardness level. Check the water hardness level in The factory pre-set doses for a large your area. The levels are generally load are 90 ml for detergent tank and indicated as: soft, medium and hard. 25 ml for fabric softener tank: the If necessary, please contact your optimal configuration to meet majority...
  • Page 24 9.5 Filling the detergent and additives on AutoDose system Please read "Detergents and other treatments" in "Hints and tips" chapter. We recommend that you do not exceed the maximum indicated level ( 4. Touch related tank buttons to toggle 1.
  • Page 25 ENGLISH 4. Gently pour only liquid softener in the 9.6 AutoDose low level AutoDose fabric softener tank . Fill indication up to the maximum indicated level Do not refill the AutoDose tanks unless appliances indicates that one or both tanks are empty. When the activated tank reaches a low level of detergent, related indicator blinks slowly and continuously on the display.
  • Page 26 9.7 Switching from AutoDose to manual dosing It is possible to disable AutoDose function for one or both tanks by pressing related button symbol. Example: • To switch Fabric Softener tank off, 2. After about 10 seconds the display...
  • Page 27 ENGLISH 2. Pour the liquid detergent in the 3. If desired, pour the fabric softener in compartment the compartment Manual 3. Gently close the detergent dispenser, 4. Gently close the detergent dispenser, till click engagement. till click engagement. If the machine has not been used for more than 4 weeks with filled tanks, detergent/ softener can become...
  • Page 28: Programmes

    This will happen even if the user turned To restart the programme, ensure the AutoDose off. drawer is properly closed and press Start/Pauza button. 10. PROGRAMMES 10.1 Programme Chart Washing programmes Programme Programme description Washing programmes Eco 40-60 White cotton and fast-coloured cotton. Normally soiled items. The energy consumption decreases and the time of the washing pro‐...
  • Page 29 ENGLISH Programme Programme description Outdoor Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation.
  • Page 30 Programme Default temperature Reference spin Maximum load Temperature range speed Spin speed range 30 °C 800 rpm 2 kg 40 °C - Cold 1200 rpm - 400 rpm Jemné prádlo 40 °C 1200 rpm 1,5 kg 40 °C - Cold 1200 rpm - 400 rpm Vlna/Hedvábí...
  • Page 31 ENGLISH AutoDose Others Programme Eco 40-60 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Bavlna ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Syntetika ■...
  • Page 32: Wi-Fi - Connectivity Setup

    Programme Universal Liquid Uni‐ Liquid for Delicates Special versal coloureds woollens powder Vlna/Hedvábí ▲ ▲ Antialergický ▲ ▲ ▲ 20 min. - 3 kg ▲ ▲ ▲ ▲ Outdoor Snadné žeh‐ ▲ ▲ ▲ lení 1) At temperature higher than 60 °C the use of powder detergent is recommended.
  • Page 33 Your email and password. If you do 4. Configure the "My AEG" app on your not have an account, create a new smart device and follow the one following the instructions in "My instructions to connect the appliance AEG"...
  • Page 34 2. Touch the Start/Pauza button to Every time you switch the activate the Remote Start before the appliance on, the appliance indicator stops blinking. takes 45 seconds to connect to the network automatically. The indicators appear on the When the indicator...
  • Page 35: Daily Use

    ENGLISH 12. DAILY USE WARNING! CAUTION! Refer to Safety chapters. Washing heavily oiled, greasy stains could cause damage rubber parts of the 12.1 Activating the appliance washing machine. 1. Connect the mains plug to the mains socket. 12.3 Setting a programme 2.
  • Page 36 12.4 Starting a programme In the display, the indicator of the operating phase starts flashing. with the delay start The programme starts, the door is locked. The display shows the indicator 1. Touch this repeatedly until the display shows the desired delay time.
  • Page 37 ENGLISH 12.9 Cancelling a running Important! If the laundry amount will not be reduced, the washing programme programme starts anyway, despite the overload. In this case, it will be not possible to 1. Press the button Zap./Vyp. to cancel guarantee the best washing results. the programme and to deactivate the appliance.
  • Page 38 12.11 End of the programme • The door stays locked. • You must drain the water to open the When the programme has finished, the door: appliance stops automatically. The 1. If necessary, touch the Odstřeďování acoustic signals operate (if they are button to decrease the spin speed active).
  • Page 39: Hints And Tips

    ENGLISH 13. HINTS AND TIPS WARNING! Refer to Safety chapters. 13.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the • Empty pockets and unfold the items. laundry care labels. •...
  • Page 40: Care And Cleaning

    • The choice and quantity of detergent save detergent, water and time (the will depend on: type of fabric environment is protected too!). (delicates, woollens, cottons, etc), the • Loading the appliance to the colour of clothes, size of the load,...
  • Page 41 ENGLISH 14.4 Descaling Clean drum Every two months If the water hardness in your Clean detergent dis‐ Twice a year area is high or moderate, we recommend that you use a penser and Auto‐ water descaling product for Dose tanks washing machines.
  • Page 42 Occasionally, at the end of a cycle the display may show the icon : this is a recommendation to perform the “drum cleaning”. Once the drum cleaning has been performed, the icon disappears. 14.8 Cleaning the detergent Clean it when needed, using ammonia...
  • Page 43 ENGLISH 5. Wash the drawer and all inserts under running water. 3. Open the drain plugs of each tank and empty them into a sink. CAUTION! Do not use sharp or metal brushes and sponges. 6. Turn the dispenser up side down and open the bottom cover as indicated in the picture.
  • Page 44 WARNING! If some residues remain on the back area of tanks, soak detergent drawer in a warm CAUTION! water. Do not use tools to Press the bottom cover as clean it. Before soaking, indicated in the picture. remove the handle by...
  • Page 45 ENGLISH 14.9 Cleaning the drain pump b. Place the bottom cover and press till "click" sound. c. Place the top cover on the tanks WARNING! compartment and press till "click" Disconnect the mains plug sound. from the mains socket. d. Replace components on manual compartment.
  • Page 46 4. Turn the filter 180 degrees in anti- 10. Clean the filter under the water tap. clockwise direction to open it, without removing. Let the water flow out. 180˚ 11. Put the filter back into the special guides by turning it clockwise. Make 5.
  • Page 47 ENGLISH When you drain the water with the emergency drain procedure, you must activate the drain system again: a. Put 2 litres of water in the main wash compartment of the detergent dispenser. b. Start the programme to drain the water.
  • Page 48: Troubleshooting

    3. Put the two ends of the inlet hose in WARNING! a container and let the water flow out Make sure that the of the hose. temperature is higher than 4. Empty the drain pump. Refer to the 0 °C before you use the emergency drain procedure.
  • Page 49 ENGLISH • Make sure that the door is properly closed. The appliance door is open or not closed correctly. • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐ •...
  • Page 50 Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not water leakages. There is water on the • Make sure that the water inlet hose and the drain hose have floor.
  • Page 51: Consumption Values

    ENGLISH Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes "Installation instruction". an unusual noise and • Make sure that the packaging and/or the transit bolts are re‐ vibrates. moved. Refer to "Installation instruction". •...
  • Page 52 The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
  • Page 53: Quick Guide

    ENGLISH Delay start Networked Off (W) Stand-by (W) standby (W) Time to Off/Standby mode is 15 minutes maximum. 1) The energy consumption of the connected function is approximately 17.5 kWh per year. To disconnect this function, please refer to the chapter 'Wi-fi - Connectivity setup'. 16.4 Common programmes These values are indicative only.
  • Page 54 Connect the mains plug to the mains 2. Set the desired options (1) by means socket. of the corresponding touch buttons. To start the programme, touch the Open the water tap. Start/Pauza (2) button. Load the laundry. 3. The appliance starts.
  • Page 55: Environmental Concerns

    ENGLISH Programmes Load Product description Cotton and synthetic lightly soiled items or once 3 kg 20 min. - 3 kg worn items. Outdoor 2,5 kg Modern outdoor sporting garments. 1 kg 4 kg Synthetic items requiring a gentle wash. Snadné žehlení All fabrics, except woollens and very delicate Odstřeďování/ 9 kg...
  • Page 56 My AEG Care app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIU5)

Table of Contents