Searching For Digital Channels From A Satellite Manually On A Transponder - Grundig 65 GOS 9799 FINE ARTS OLED User Instructions

SETTING­FURTHER­CHANNELS
Searching­for­digital­chan-
nels­from­a­satellite­manually­
on­a­transponder
If a certain channel cannot be found with
automatic search, you can search it manually
by manual search function. You must enter all
parameters of the channel correctly. You can
obtain the current transponder information from
teletext page, satellite TV magazines or internet.
1­ Open the menu with »MENU«.
2­
Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­ Select the menu item »Source« with »
<
» « and press »
– » Source« menu is active.
4­
Select the line »Manual Channel Search«
with » « or »
V Λ
confirm.
5­ Select the option »Satellite (DVB-S/S2)«
with » « or »
V Λ
confirm.
6­
Select the required option for manually
adjusting with »
V
­ Service­Type­
< >
Press » « or » « to select whether you
want to search for only television channels
(DTV), only radio channels (Radio) or both
(Radio+TV).
­ Scan­Type­
< >
Press » « or » « to select whether you
want to search for only free digital television
channels (Free), only scrambled digital
television channels (Scrambled) or both
(Free + Scrambled).
­ Transponder­
Enter the transponder frequency with
»1...0« in five digits.
­ Symbol­Rate­
Enter the transponder symbol rate
with »1...0« in five digits.
­ Polarization­
Set the polarisation for the transponder to
»Horizontal« or »Vertical« using »
94­ ENGLISH
«, »
V
>
« to confirm.
V
« and press »OK« to
« and press »OK« to
« or » «:
Λ
<
« or »
­-----------------------------------------------------
­ Network­Search­
Select the network search with »
as »On« or »Off«.
7­
Press »

– T he »Digital Searching« menu appears,
and the scan for TV channels begins.
– A ll channels found on the transponder are
shown. The new channels will be added
to the bottom of the channel table.
Note:
The search can be aborted with »EXIT«.
7
«,
Λ
8­ Press »EXIT« to end the setting.
« or
>
«.
« (red) to start searching.
< >
« or » «