Auto Sleep; Store Logo View; Power Led Brightness; Switching On/Off Weather Information - Grundig 65 GOS 9799 FINE ARTS OLED User Instructions

ADVANCED­SETTINGS
1­ Open menu with »MENU« button.
2­ Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­
Select menu item »TV« with »
press » « to confirm.
V
– »TV« menu is active.
4­ Select the line »Advanced« with »
» « and press »OK« to confirm.
Λ
Settings > TV > Advanced
Picture Sound Source

Auto Sleep

Show Logo Display
Power LED Backlight
Power Saving Mode
Permanent Timeshift
Change Area Change Mode
Note:
Additional operations are explained in the
7
following sections.
Auto­sleep
This function will turn the television to stand-by
mode in 4 hours depending on your setup, un-
less the television receives any signal, or keys or,
according to European regulations, the remote
remains untouched for 5 minutes.
1­ From the »Advanced« menu use »
» « to select the line »Auto Sleep«.
Λ
2­
Select the switch-off time with »
Note:
Set the function to »Off« with »
7
switch off.
3­ Press »BACK
<
level or press »EXIT« to end the setting.
«, »
V
< >
« or » « and
« or
V
Tuesday
xx xxx xxxx
TV Network Timer Parental
4 Hours
No
Medium
Off
Off
Back
BACK EXIT
« or
V
< >
« or »
< >
« or »
« to go back one menu
­ - -----------------------------------------------------------------------------
Store­logo­view­
«,
This function is intended for feature introduction
Λ
at stores. When »On« is selected, feature logos
are displayed.
1­
From the »Advanced« menu use »
» « to select the line »Shop Logo Display«.
Λ
2­ Select »Yes« with »
Note:
Set the function to »No« with »
7
switch off.
3­ Press »BACK
level or press »EXIT« to end the setting.
Power­LED­brightness­
You can adjust power (stand-by) LED brightness
in operation mode of television.
1­
From the »Advanced« menu use »
Exit
» « to select the line »Power LED Bright-
Λ
ness«.
<
2­ « or »
U se »
»High«, »Medium« or »Low«.
3­
Press »BACK
level or press »EXIT« to end the setting.
Switching­on/off­weather­infor-
mation
If this function is activated, a weather logo and
the local temperature is displayed.
1­ From the »Advanced« menu use »
» « to select the line »Weather Widget«.
Λ
«.
<
2­ « or »
Press »
3­
Press »EXIT« to end the setting.
« to
Switching­on/off­help­informa-
tion
Help information about the relevant feature will
be displayed if you select one of the options in
the menu and wait for a while. This notification
can be enabled or disabled.
1­ Select »Help« in »Advanced« menu with
» « or »
V
<
2­
Press » « or »
3­
Press »EXIT« to end the setting.
< >
« or » «.
« to go back one menu
<
>
« to set the brightness to
« to go back one menu
<
>
« to turn to »On« position.
«.
Λ
>
« to turn to »On« position.
ENGLISH
« or
V
< >
« or » « to
« or
V
« or
V
65­