2.2.6
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon
booting. The default setting is
2.2.7
Memory Test
Enabled
When set to
, this parameter allows the system to perform a
RAM test during the POST routine.
system detects only the memory size and bypasses the test routine.
Disabled
The default setting is
2.2.8
Quiet Boot
This parameter enables or disables the quiet boot function. When set
to
Enabled
, BIOS is in graphical mode and displays only an
identification logo during POST and while booting. After which the
screen displays the operating system prompt (such as DOS) or logo
(such as Windows 95). If any error occurred while booting, the system
automatically switches to the text mode.
Even if your setting is
Enabled
while booting by pressing
activation of the keyboard.
When set to
Disabled
, BIOS is in the conventional text mode where
you see the system initialization details on the screen.
BIOS Utility
Enabled
.
When set to
.
, you may also switch to the text mode
after you hear a beep that indicates the
Disabled
, the
2-9