Configuration Table - Acer V62X User Manual

2.2.9

Configuration Table

This parameter allows you to display the configuration table after
POST but before booting. The configuration table gives a summary of
the hardware devices and settings that BIOS detected during POST.
A sample configuration table appears below.
CPU ID : Pentium II
CPU Clock : 233 MHz
Math Coprocessor:Installed
IDE Drive 0 : xxx MB
IDE Drive 1 : xxx MB
IDE Drive 2 : xxx MB
IDE Drive 3 : xxx MB
Diskette Drive A: xx MB, xx-inch
Diskette Drive B: None
Pointing Device: None
ECC/Parity Mode: Disabled
2-10
Base Memory: : xxx KB
Extended Memory: xxxx KB
Shadow RAM : xxx KB
L1 (CPU) Cache : xxx KB, Enabled
L2 (CPU) Cache : xxx KB, Enabled
Serial Port(s) : 3F8h, 2F8h
Parallel Port(s): 378h
DRAM Bank 0 : Fast Page Mode
DRAM Bank 1 : None
DRAM Bank 2 : None
USB HC : Disabled
User's Guide